Poppiswap Arts Cards You Cannot Set It in This Mode
Description
Here are some common troubleshooting tips
Solution
Troubleshooting Guide
If a problem occurs, get-go refer to this Troubleshooting Guide. If this Troubleshooting Guide does not resolve the trouble, contact your dealer or nearest Catechism Service Center.
Ability-Related Bug
The bombardment cannot be recharged with the battery charger provided.
- Practice not recharge whatever battery pack other than a genuine Catechism Battery Pack LP-E8.
The camera does non operate even when the ability switch is gear up to <ON>.
- The battery is not properly installed in the camera
- Recharge the bombardment
- Make sure the bombardment compartment embrace is closed
- Make sure the bill of fare slot embrace is closed
- Printing the <
> button
The bombardment charger's lamp blinks.
- If there is a trouble with the bombardment charger, the protective circuit volition stop the charging functioning and the charge lamp volition blink in orange. If this happens, disconnect the charger'south power plug from the power outlet and remove the battery pack. Attach the battery pack to the charger again and wait a while before connecting the charger to a power outlet again.
The admission lamp nevertheless blinks even when the power switch is fix to <OFF>.
- If the power is cut off while an image is existence recorded to the carte du jour, the access lamp will still continue to light/blink for a few seconds. When the paradigm recording is completed, the power volition turn off automatically.
The battery becomes wearied quickly.
- Employ a fully-charged bombardment pack
- The rechargeable battery pack performance will dethrone over repeated utilize. Purchase a new 1.
- If you use Live View shooting or shoot movies for a prolonged menses, the number of possible shots volition decrease.
The camera turns off by itself
Shooting-Related Problems
No images can be shot nor recorded.
- The card is not properly inserted
- If the card is full, supervene upon the card or delete unnecessary images to make room
- If you effort to focus in One-Shot AF mode while the focus confirmation light <
> in the viewfinder blinks, a film cannot be taken. Press the shutter button halfway once more to focus, or focus manually - Slide the card's write-protect switch to the Write/Erase setting
The image is out of focus.
- Set the lens focus mode switch to <AF>
- To forbid camera shake, press the shutter button gently
- If the lens has an Image Stabilizer, set the IS switch to <ON>.
The maximum outburst during continuous shooting is lower.
- Set the [
Custom Functions (C.Fn)] menu's [High ISO speed dissonance reduction] to [Standard], [Depression], or [Disable]. If it is set to [Stiff], the maximum burst during continuous shooting will greatly decrease - If you shoot something that has fine detail (field of grass, etc.), the file size will exist larger and the actual maximum burst might be lower than the number mentioned
ISO 100 cannot be fix.
- Under the [ Custom Functions (C.Fn)] bill of fare, if [Highlight tone priority] is set to [Enable], ISO 100 cannot be set. When [Highlight tone priority] is set to [Disable], ISO 100 can be set. This as well applies to flick shooting
The Motorcar Lighting Optimizer cannot exist prepare.
- Under the [ Custom Functions (C.Fn)] menu, if [Highlight tone priority] is fix to [Enable], the Motorcar Lighting Optimizer cannot be prepare. When [Highlight tone priority] is set to [Disable], and so the Auto Lighting Optimizer can be gear up. This also applies to movie shooting
When I use the <AV> mode with flash, the shutter speed becomes wearisome.
- If y'all shoot at night when the groundwork is dark, the shutter speed becomes tiresome automatically (slow-sync shooting) so that the discipline and background are properly exposed. If you exercise non want a boring shutter speed to be set, gear up the [ Custom Functions (C.Fn)] card'due south [Flash sync. speed in Av style] to 1 or ii
The congenital-in wink does non fire.
- If you shoot continuously with the built-in flash at short intervals, the wink might stop operating to protect the flash unit.
The camera makes a noise when it is shaken.
- The built-in wink'south pop-up mechanism moves slightly. This is normal.
The shutter makes two shooting sounds during Alive View shooting.
- If y'all use flash, the shutter will make two sounds each time you shoot
The moving-picture show shooting terminates past itself.
- If the card'due south writing speed is tedious, pic shooting may end automatically. Use an SD Speed Class 6 "
" or faster menu. To detect out the card'southward read/write speed, encounter the card manufacturer's Web site, etc. - If the moving picture file size reaches 4 GB or if the picture recording time reaches 29 min. 59 sec., film shooting will stop automatically.
When a motion picture is played, camera operation dissonance tin be heard.
- If you operate the camera's dials or lens during movie shooting, the respective functioning dissonance will also be recorded. Using an external microphone (commercially available) is recommended
Display & Operation Issues
The LCD monitor does non brandish a clear image.
- If the LCD monitor is dirty, use a soft material to clean it.
- In low or high temperatures, the LCD monitor brandish may seem slow or might wait black. It will render to normal at room temperature.
The carte du jour screen shows few tabs and options.
- In Basic Zone modes and in motion picture shooting style, certain tabs and menu options are non displayed. Set the shooting mode to a Artistic Zone mode
The epitome cannot be erased.
- If the image has been protected, it cannot be erased
The file proper name's commencement character is an underscore ("_MG_").
- Set the color infinite to sRGB. If Adobe RGB is set, the first character volition be an underscore
The file numbering does not start from 0001.
- If you use a card which already has images recorded, the file numbering might start from the final image in the card
The shooting date and time displayed is incorrect.
- The correct appointment and time has not been fix
No image appears on Goggle box screen
- Make sure the AV cable or HDMI cable's plug is inserted all the way in.
- Gear up the video OUT system (NTSC/PAL) to the same video system as the TV fix
- Use the AV cable that came with the camera
The menu reader does not detect the card.
- Depending on the card reader and reckoner Bone used, SDXC cards might not be correctly detected. In such a example, connect your camera and computer with the provided interface cable, and transfer the images to your figurer using EOS Utility (provided software).
The [Eye-Fi Settings] menu particular does non appear.
- [Eye-Fi Settings] will but appear when the Eye-Fi card is inserted in the photographic camera. If the Eye-Fi card has a write-protect tab, you will non be able to bank check the card'southward connection status, or disable Center-Fi carte du jour transmission when the tab is in the locked position.
Press-Related Problems
In that location are fewer press furnishings than listed in the instruction manual.
- What is displayed on the screen differs depending on the printer. This instruction manual lists all the printing effects available
Source: https://support.usa.canon.com/kb/index?page=content&id=ART108906